Guidelines for Installation and Configuration of a Linksys Range Extender

A Linksys range extender is very useful device to enhance the existing WiFi range throughout home, offices, and building. Before the process of Linksys Extender Setup, you have to follow some basic creamy smooth setup steps to make your device up and running.

Linksys Initial Setup for WiFi Range Extenders

For a proper configuration of Linksys Range extender, make sure that you are receiving live and active internet connection from the main router. Moreover, you should have SSID, security settings broadcast channel and password for your WiFi router and the range extender. In case you don’t have, then without any delay contact our tech support team and ask for Linksys Extender login and setup. Don’t worry we are sitting just beside you.

Now, what you have to do plug in your range extender into an electrical outlet. Better place it nearby your existing modem and WiFi router. Note down that all there WiFi devices supposed to be out of the reach of baby monitors, walls, windows, metal appliances, electronic gadgets, cordless phones, public WiFi or hotspot and automatic door locks.

Let the LED lights on your range extender starts blinking. After that, connect your computer/ laptop with range extender and open a web browser onto that. Now, in the address bar of the web browser you have to type extender.linksys.com.

Note: You can also use the default IP address of your Linksys range extender for login.

Now, you will be prompt to fill login details (username and password) and enter the ‘wireless network information’ on the setup page. Once done, click ‘Save’.

As soon as your range extender is properly set up, you can connect your existing router with it and access the internet from anywhere in the house or office without any signal breakage.

Note: If aforementioned steps don’t work for you, then try resetting it using its web interface.

How to Reset Linksys Range Extender

If you ever need to reset your range extender to its factory default settings, then there are generally two ways to do so. But before anything else, you have to know the Status of Linksys Extender that it is properly and physically disconnected from the connected WiFi devices and the home network.

Note: This unplugging and disconnection of wires are just temporary, you can reconnect them all with each other soon after the Linksys range extender reset process.

The reset process of your WiFi range extender is very simple. You can do this by pressing and holding the reset button for 15-20 seconds with the help of a paper click. You can release the button as soon as you see blinking green lights on your device. If this process doesn’t work, unplug your device and plug it back after two minutes.

Note: Linksys WiFi Range Extender Setup needs the entire configuration settings to be entered again.

You can also reset your Linksys device through the wireless connection. Here, you have to open a web browser and in the field of address bar type http://extender.linksys.com. In case this URL doesn’t work, then you can enter the default IP address of it.

Now, from the menu section you have to choose ‘administration’ and after that ‘factory defaults’. Next, choose ‘restore factory defaults’ and in the last unplug your range extender for five minute and after that plug it back again.

Was this article proved helpful in resolving all your brain-teasers issues? Did Linksys WiFi Extender Login page allow you to access Linksys extender.linksys.com? Yes or No? It is worth essential for us to know your feedback. Trust us it will be our honor to handle and solve your queries. You are more than a welcome to drop your issues below. We assure you that your entire troubles and problems will be sought out within a matter of minutes.

Make yourself free to contact us anytime.

Spread like wildfire
  • 11
    Shares

Leave a Reply

Your email address will not be published. Required fields are marked *