As your car gets older with time and usage, mechanical problems are bound to crop up. And, brakes are a common issue that most car owners have to deal with. Sooner or later, you would be seeking brake repairs from your regular car mechanic or service provider. However, you must understand the brake system of your car and how they work so as to understand their repairs better. The brake is the most essential part of the car.
The Brake system
The brakes are an essential part of any vehicle, and the brake system relies on the efficient working of its each and every component. Any fault means that the brake system is not working at its optimum and driving a car with faulty brakes means playing with the safety of your life and the vehicle. When you press the brake pedal, the cylinder that delivers brake fluid gets activated. As a result, the brake pad applies pressure to the rotors, and friction is created to stop the car. Corroded and faulty brake systems mean that it is time to go for brake repairs.
Brake inspection before the Brake Repairs
The car mechanic will thoroughly check the brake system and make a comprehensive inspection. The technician would be able to locate the potential issue if he is experienced and carries the know-how. Even a slight fault can play havoc with the brakes and jeopardize the vehicle and its driver. Thus, there is no scope for making any mistake here or taking any risks. Hence it is always recommended to be alert and have a perfect knowledge of the vehicle you drive.
Here is what to expect during a Brake Inspection:
- Inspection of the pads or shoes.
- Inspection of the callipers and rotors.
- Inspection of the wheel cylinders.
- Inspection of the hardware and hoses.
- Inspection of the parking brake cables.
- Inspection of the master cylinder fluid exchange.
- Inspection of the wheel bearings and grease seals.
It is best to remain proactive when it comes to repairs. An annual check under an expert and an experienced mechanic will give you the confidence that the brake system of the car is in optimum working condition. Moreover, you can easily get any minor repairs done before they go on to become bigger problems.
Typical brake repairs required
The brake system is made of several interlocking components that work together. Problem with any one of those components can hamper with the working of the brakes. The most common brake repairs your vehicle might need are as follows.
- Shoe Replacement – Shoe Replacement is recommended every 20,000 miles of drive. Look at the wear indicator at oil change time to see if any replacement is needed. This is where least attention is given by the driver.
- Line Replacement – Brake lines transmit the fluid from master cylinder throughout the brake system. The lines must be clean and free of any dirt particle. When it is hard to stop the car, it means that the lines need to be cleaned or replaced.
- Master Cylinders – Though master cylinders rarely need to be replaced, it is possible that they may accumulate dirt or wear out.
- Bleeding – Bleeding is the process of draining all the brake fluid and replacing it with new fluid. If the brake pedal needs a lot of pressure, it means bleeding is needed.
When looking for brake repairs services, always rely on a reputed service provider who can offer you a service contract for your new or used car. Apart from looking for great prices and comprehensive policies, one should also seek lower repair costs and a no-hassle warranty. Make sure you can trust the work of the service provider.